二维码已过期,点击刷新

请使用微信扫描此二维码

您微信暂未注册或绑定账号

注册账号

绑定账号
立即注册
The latest version: 1.6 Install
Arc Offset True GIF
This plug-in can batch offset copy the arc by entering the distance and quantity of offset copy, and the positive and negative values of the distance determine the offset direction. The offset distance of the copied arc is calculated by the vertex, and the copied arc is thrown to maintain the arc attribute
5
  2022-7-7 14:29   Category: Line/Face   Views: 18490   Comments number:1
The latest version: 0.5.3 Install
Street Generator GIF
The road generation plug-in function is the last tool of SketchUp that can automatically generate road network through the road centerline. It can set the road width, turning radius and threshold value, and can choose whether to automatically generate road enclosed parcels.Users can set different material names of centerlines to generate multiple levels of different widths
3.8
  2022-6-16 15:23   Category: Building Facility   Views: 56306   Comments number:8
The latest version: 2.0.2 Install
VBO Piping GIF
A convenient water pipe creation tool, which creates water pipes from the lines in the selected group / component, and automatically adds fittings at the nodes. After the water pipe is created, you can double-click to enter the line (2D) mode at any time, and use the brush tool to edit and draw.Points to note when using this tool:1. Ball valve, sleeve and other accessories can only
5
  2022-6-1 10:05   Category: Building Facility   Views: 9580   Comments number:2
The latest version: 1.4.1 Install
Parking GIF
Easily add straight parking lines to your model, and you can set the width, depth, and angle of parking spaces.Usage: click a starting point and drag to preview the parking space, and press "&\91" under English input method Key to switch between absolute width and minimum width, press "&\93;" Key to change the drawing direction of parking space
5
  2022-5-31 14:23   Category: Line/Face   Views: 5595   Comments number:1
The latest version: 1.0.1 Install
VBO Jump2Levels GIF
Select the desired target directly from the nested group / component. After activating the command, hover the mouse over the target for selection, which needs to be realized with function keys. The name / label of each layer will be displayed in the process of jumping over the level.Press and hold Shift + mouse wheel: reach the target level, click and select to enter the current level
5
  2022-5-27 10:42   Category: Layer/Group   Views: 2505   Comments number:1
The latest version: 3.2 Install
Mc AlignEnds GIF
Align the selected edge line to any model element near an axis. This tool is similar to the placement boundary (suapp No. 165), which is more practical when making special-shaped alignment.
5
  2022-5-11 17:18   Category: Utility Tools   Views: 4367   Comments number:1
The latest version: 1.1.1 Install
nz Sunshine GIF
Mark the solar exposure data, including solar altitude angle, summer solstice, winter solstice, spring equinox, latitude, longitude, altitude and azimuth. You can also see the incidence angle, percentage of exposure, horizontal shadow angle and vertical shadow angle.The "incident light" generated during annotation is presented as an auxiliary dotted line, and auxiliary points and
5
  2022-5-10 18:16   Category: Text/Labeling   Views: 3550   Comments number:1
The latest version: 1.1 Install
CG Adjust-N-Export GIF
Save the selected group or component in the model as SKP model file separately. Before saving, it is necessary to ensure that the model has been named and saved. When saving a group or component separately, a folder with the name of the model will be created by default. Of course, the name of the saved folder can be customized.This job has four commands that can be adjusted
2.3
  2022-5-10 17:48   Category: Layer/Group   Views: 3471   Comments number:3
The latest version: 1.0 Install
Elevate Contours GIF
Generally, we get plane contours from CAD. This tool can lift a group of plane contours in Su into three-dimensional contours step by step. It can quickly convert the contour of the plane into a terrain model in combination with the generated terrain (suapp No. 429).Plug in usage:1. Place a group at altitude z = 0
5
  2022-5-9 11:36   Category: Line/Face   Views: 5675   Comments number:2
The latest version: 1.3.1 Install
Dome Lozenge GIF
Through parameter setting, a quasi spherical dome based on triangles is created at the origin, which is suitable for rapid modeling of dome buildings and structures. Note that if the parameter setting is too large, the generation time will be a little longer.This tool can select from the parameters to generate a report, which displays the detailed data of line segments and faces in great detail
5
  2022-5-6 15:05   Category: 3D Form   Views: 3449   Comments number:1



线

在线咨询
小P在线时间周一至周五9:00-18:00,下班时间请先查看常见问题↑↑
SUAPP公众号

SUAPP公众号

扫码关注
建模无敌

SUAPP插件库| 简体中文|繁體中文|English Version|

Copyright © 2008 - 2020 SUAPP插件库 All rights reserved. ( 蜀ICP备19001322号-4 )

GMT+8, 2024-3-28 19:52 , Processed in 0.060910 second(s), 5 queries , Gzip On, MemCache On.

返回顶部