Surface flow: 1.1.0 < br / >Before using this function, build the base groups needed for surface flow.
The correct basic group must contain 3 subgroups, which are: < br / > respectively1. The group containing the target surface (the target surface must be a quadrilateral surface with four corners) < br / >2. Group containing datum plane (the datum plane used for projection must be rectangle or quadrilateral of custom shape with the same topological structure as the target surface) < br / >3. A group of two projected connecting lines connecting the vertices of the target surface and the datum plane (the connecting line or reference auxiliary line must connect the two adjacent corner points of the reference plane and the target surface) < br / >
Select the base group and the source group or component used to project to the surface, and execute the surface flow command to generate the results.
Please note: < br / >1. For nested source groups, the nesting level is ignored and only faces in the first level are processed.
2. When processing, the positive and negative materials in the source group or component are passed to the generated result.
3. The target surface mesh must conform to: < br / >-A unit must be composed of exactly 4 lines. Pay attention to whether there are collinear broken lines < br / >-The projection connecting line must connect the vertices of two adjacent corners < br / >-Must contain four corners < br / >-Each row in the grid must contain the same number of cells < br / >-No opening < br / > is allowed
Surface flow: 2.0.0 < br / >Before using this function, the projected surface group, datum plane or datum plane group required for surface flow and the surface flow object for projection to the surface are constructed.
Then click the plug-in command: < br / >1. Select the surface flow object to be projected to the surface; < br / >2. Select datum plane or datum plane group; < br / >3. Select the group of projected surfaces; < br / >4. Finally, according to the prompt, select the fixed point of datum plane and projection surface group to generate the result.
Note: < br / >1. In the process of using the plug-in, you can right-click to select whether to cut the surface flow mode2. Projected surfaces and datum planes do not currently support components
Be careful with old versions! Shows the old version for reference and testing purposes, you should use the latest version.
-
Version2.1.0
(简体中文)
Install
-
Release date: 2020-11-3 11:37
File size: 27.23 KB
-
OS: Windows
Mac
Applicable version: 22
21
20
19
18
17
- 优化了操作步骤，大大加快建模效率。
2022.12.13 增加曲面流动（无切割）功能。
-
Version1.1.0
(简体中文)
Install
-
Release date: 2015-3-22 04:55
File size: 30.76 KB
-
OS: Windows
Mac
Applicable version: 20
19
18
17
16
15
14
13
8
7
6
- SUAPP.ME 完美汉化
- Plugin Information
- Ratings:
-
4.4
(27)
- Plugin Category
- Line/Face
- Uploader:
-
双鱼
- Release date:
- 2015-3-22 04:54
- Update date:
- 2022-12-13 11:28
- current version:
- 2.1.0
- Command numbers:
- 2
- File size:
- 27.23 KB
- Introduction
-
This plug-in function is equivalent to the "flow along surface" command in rhino. It can make the source geometry group or component generate natural bending deformation along the target surface according to the reference plane, so as to achieve the effect of surface wrapping.
Surface flow: 1.1.0 Author: caul < br > 0Before using this function, build the base groups needed for surface flow. The correct base group must contain three subgroups: the group containing the target surface, the group containing the datum plane, and the group containing two projected connecting lines connecting the vertices of the target surface and the datum plane!
Then select the base group and the source group or component for projection to the surface, and execute the surface flow command to generate the result.
Surface flow: 2.0.0 by elever < br > byBefore using this function, the projected surface group, datum plane or datum plane group needed for surface flow and the surface flow object for projection to the surface are constructed. The result can be generated after the surface flow command is executed according to the prompt.
Surface Flows（Surface Flows）
Animation Tutorial
1. Select the surface flow object for projection to the surface; 2. Select the datum plane or datum plane group; 3. Select the group of projected surfaces; 4. Select the fixed points of datum plane and projected surface group according to the prompt to generate the result.
Surface Flows without Cut（Surface Flows without Cut）
1. Select the surface flow object to project to the surface; 2. Select a datum plane or datum plane group; 3. Select a group of projected surfaces; 4. Finally, according to the prompts, select the fixed point of the datum plane and projection surface group to generate the no cutting result.
-
Developer: Elever Send email to the developer>
- Version2.1.0New command
- 优化了操作步骤，大大加快建模效率。
2022.12.13 增加曲面流动（无切割）功能。
- Screenshots
-
- 应用实例
-
- Comment
-
-
【曲面流动】显示“不是可拓扑化的四边面”的原因：
https://ask.asketchup.com/question/25245