立即注册
The latest version: 2.0.2 Install
VBO Piping
A convenient water pipe creation tool, which creates water pipes from the lines in the selected group / component, and automatically adds fittings at the nodes. After the water pipe is created, you can double-click to enter the line (2D) mode at any time, and use the brush tool to edit and draw.Points to note when using this tool:1. Ball valve, sleeve and other accessories can only
5
  2022-6-1 10:05   Category: Building Facility   Views: 1244   Usage: 316   Comments number:1
The latest version: 1.0.1 Install
VBO Jump2Levels
Select the desired target directly from the nested group / component. After activating the command, hover the mouse over the target for selection, which needs to be realized with function keys. The name / label of each layer will be displayed in the process of jumping over the level.Press and hold Shift + mouse wheel: reach the target level, click and select to enter the current level
5
  2022-5-27 10:42   Category: Layer/Group   Views: 620   Usage: 177   Comments number:1
The latest version: 1.4.1 Install
Parking
Easily add straight parking lines to your model, and you can set the width, depth, and angle of parking spaces.Usage: click a starting point and drag to preview the parking space, and press "&\91" under English input method Key to switch between absolute width and minimum width, press "&\93;" Key to change the drawing direction of parking space
5
  2022-5-31 14:23   Category: Line/Face   Views: 1759   Usage: 463   Comments number:1
The latest version: 3.2 Install
Mc AlignEnds
Align the selected edge line to any model element near an axis. This tool is similar to the placement boundary (suapp No. 165), which is more practical when making special-shaped alignment.
5
  2022-5-11 17:18   Category: Utility Tools   Views: 1031   Usage: 350   Comments number:1
The latest version: 1.1 Install
CG Adjust-N-Export GIF
Save the selected group or component in the model as SKP model file separately. Before saving, it is necessary to ensure that the model has been named and saved. When saving a group or component separately, a folder with the name of the model will be created by default. Of course, the name of the saved folder can be customized.This job has four commands that can be adjusted
5
  2022-5-10 17:48   Category: Layer/Group   Views: 630   Usage: 230   Comments number:1
The latest version: 1.0 Install
Elevate Contours
Generally, we get plane contours from CAD. This tool can lift a group of plane contours in Su into three-dimensional contours step by step. It can quickly convert the contour of the plane into a terrain model in combination with the generated terrain (suapp No. 429).Plug in usage:1. Place a group at altitude z = 0
5
  2022-5-9 11:36   Category: Line/Face   Views: 1253   Usage: 412   Comments number:2
The latest version: 1.3.1 Install
Dome Lozenge
Through parameter setting, a quasi spherical dome based on triangles is created at the origin, which is suitable for rapid modeling of dome buildings and structures. Note that if the parameter setting is too large, the generation time will be a little longer.This tool can select from the parameters to generate a report, which displays the detailed data of line segments and faces in great detail
5
  2022-5-6 15:05   Category: 3D Form   Views: 907   Usage: 349   Comments number:1
The latest version: 1.1.1 Install
nz Sunshine
Mark the solar exposure data, including solar altitude angle, summer solstice, winter solstice, spring equinox, latitude, longitude, altitude and azimuth. You can also see the incidence angle, percentage of exposure, horizontal shadow angle and vertical shadow angle.The "incident light" generated during annotation is presented as an auxiliary dotted line, and auxiliary points and
5
  2022-5-10 18:16   Category: Text/Labeling   Views: 1079   Usage: 308   Comments number:1
The latest version: 1.0.2 Install
Cut By Altitude
Cut a group object by elevation. This function can quickly divide the area with specific height. For example, it can be divided into snow covered area above a certain elevation of the terrain, or it needs to be cut layer by layer when drawing simple buildings.be careful:The cutting line is in the group by default.After cutting, a wireframe group will be generated, such as
5
  2022-4-26 10:47   Category: Utility Tools   Views: 1026   Usage: 354   Comments number:1
The latest version: 3.6 Install
Move Rotate Open Close GIF
This is a simple dynamic setting tool. By setting properties like sliding bar movement and hinge rotation for group or component objects, click the object to show the corresponding switch dynamics. It allows you to easily slide drawers in the cabinet model, rotate doors and windows in the house, and switch between the positions of any object you set
5
  2022-4-2 16:03   Category: Render Tools   Views: 2307   Usage: 676   Comments number:3



线

在线咨询
小P在线时间周一至周五9:00-18:00,下班时间请先查看常见问题↑↑
SUAPP公众号

SUAPP公众号

扫码关注
建模无敌

SUAPP插件库| 简体中文|繁體中文|English Version|

Copyright © 2008 - 2020 SUAPP插件库 All rights reserved. ( 蜀ICP备12030683号 )

GMT+8, 2022-7-5 10:40 , Processed in 0.100338 second(s), 3 queries , Gzip On, MemCache On.

返回顶部