立即注册
87508
Views
10
Comments
15023
Usage

1001bit Tools

1001bit Tools
4.5
(10)
Version: 1.0.2 Install
Plugin Information
Ratings:
4.5
 (10)
Plugin Category
Building Facility
Uploader:
吧卦
Release date:
2013-8-19 22:38
Update date:
2013-11-14 22:45
current version:
1.0.2
Command numbers:
39
File size:
560.17 KB
Introduction
1001bit is a set of very intuitive and powerful building professional plug-ins, which adds a number of practical functions for the building professional.


Point on face from reference point(Point on face from reference point) Animation Tutorial
Places construction points on the selected face at horizontal and vertical distances from the reference point.

Divide along edges(Divide along edges) Animation Tutorial
Dividing the selected sideline into segments generates construction points and automatically groups them, while the sideline remains unchanged. There are three segmentation methods: subdivision number, fixed distance and average segmentation. After segmentation, you can continue to select other sidelines to inherit segmentation properties, and the sidelines remain unchanged.

Align selected entities (3 points)(Align selected entities (3 points)) Animation Tutorial
Align any group or component by defining 3 base points and 3 target points.

Draw perpendicular line (3D)(Draw perpendicular line (3D)) Animation Tutorial
Draws an edge (line) perpendicular to the target entity.

Draw face on plane(Draw face on plane) Animation Tutorial
Draws a face on a plane defined by three points. When drawing, double-click the closed face to finish.

Create best fit face(Create best fit face) Animation Tutorial
Supports the creation of faces from non coplanar points. This command can be used to create faces when small differences prevent them from being created in the normal way.

Extrude along path(Extrude along path) Animation Tutorial
This tool is similar to SketchUp's path following tool, but does not need to place the profile near or in the direction of the path.

Extrude taper(Extrude taper) Animation Tutorial
On a cone, this tool stretches the selected face to maintain any cone trend associated with that face.

Revolved surface(Revolved surface) Animation Tutorial
Creates a surface by rotating a defined axis along the selected profile. It has an extra feature, because it's spinning, so it can scale the outline. The rotation ratio is the ratio of the final distance from the point to the axis to its original distance.

Move vertex(Move vertex) Animation Tutorial
After running the command, each vertex of the model can be moved flexibly.

Fillet(Fillet) Animation Tutorial
Round a corner or join two intersecting edges. Chamfering is one of the most common commands for users familiar with AutoCAD.

Chamfer(Chamfer) Animation Tutorial
The tangent angle is created by entering the vertex distance of two intersecting edges.

Extend(Extend) Animation Tutorial
Extends an edge to another edge or face.

Offset edges(Offset edges) Animation Tutorial
Offset the line segment by determining the distance, which is a supplement to the offset function of SketchUp. The offset of SketchUp is only applicable to faces, and this plug-in is applicable to a single selected edge.

Slice faces horizontally(Slice faces horizontally) Animation Tutorial
Cuts the selected face horizontally at a level away from the reference point / level.

Slope selected edges(Slope selected edges) Animation Tutorial
Changes the selected edge to an edge with a continuous slope.

Linear array(Linear array) Animation Tutorial
After selecting the target group or component, setting the placement method and parameters, the cable can directly array the target group. It is convenient to place array objects such as street lamps and street trees.

Rectangular array(Rectangular array) Animation Tutorial
By determining the row spacing, column spacing, row number, column number and other array parameters, the group or component is rectangular array. The final array effect is related to the angle drawn manually.

Polar array(Polar array) Animation Tutorial
By determining the array parameters such as angle, number and total distance along the central axis, the group or component is arrayed in a ring. It's very convenient to make circular stairs.

Vertical wall(Vertical wall) Animation Tutorial
Create a vertical wall based on the selected section, and the wall will always follow the mouse lofting. Different from its own path following, it has various functions that are useful to architecture.

Openings on walls(Openings on walls) Animation Tutorial
Select the section style of the opening, and then select the vertical wall to create the opening.

Horizontal grooves(Horizontal grooves) Animation Tutorial
Creates a horizontal groove on the face of a block with thickness.

Build staircase - single flight(Build staircase - single flight) Animation Tutorial
By selecting the stair style, setting the stair parameters, and specifying the direction of the stair, you can create a single run stair.

Build staircase (Type 2)(Build staircase (Type 2)) Animation Tutorial
By selecting the direction of the stairs, setting the parameters of the stairs, and specifying the direction of the stairs, you can create style a double running stairs.

Build staircase (Type 3)(Build staircase (Type 3)) Animation Tutorial
By selecting the direction of the stairs, setting the parameters of the stairs, and specifying the direction of the stairs, you can create style B double running stairs.

Build staircase (Type 4)(Build staircase (Type 4)) Animation Tutorial
By selecting the direction of the stairs, setting the parameters of the stairs, and specifying the direction of the stairs, you can create style C double running stairs.

Build spiral staircase(Build spiral staircase) Animation Tutorial
You can create spiral stairs by selecting stair style, setting stair parameters, choosing whether to use handrail or not, and specifying stair position.

Build escalator(Build escalator) Animation Tutorial
The escalator can be created by setting stair parameters such as step width, side plate thickness and story height, and specifying stair direction.

Create window frame(Create window frame) Animation Tutorial
By selecting the window frame style and setting the window frame parameters, the window frame can be generated by selecting the face.

Create door frame(Create door frame) Animation Tutorial
By selecting the door frame style and setting the door frame parameters, the door frame can be generated by selecting the face.

Divide panels(Divide panels) Animation Tutorial
By selecting the style of the split box and setting the parameters, the split window frame can be generated by selecting the face. It can be used to make large French windows and curtain walls.

Grilles and screens(Grilles and screens) Animation Tutorial
Select the style face to be hollowed out, set the hollowed out (grid) parameters, and select the face to be hollowed out to generate a grid skin.

Horizontal louvres(Horizontal louvres) Animation Tutorial
Create horizontal louvers (concave and convex) by setting parameters and selecting faces.

Vertical louvres(Vertical louvres) Animation Tutorial
Create vertical louvers (concave and convex) by setting parameters and selecting faces.

Rectangular grille(Rectangular grille) Animation Tutorial
Select the side line and set parameters to generate rectangular bar, which is similar to the effect of line to square column.

Tubular grille(Tubular grille) Animation Tutorial
Select the side line and set the parameters to generate a circular tube, which is similar to the effect of line to cylinder.

Create rafters joists(Create rafters joists) Animation Tutorial
Automatically creates joists, rafters, slats, and more on selected faces. There are many types of profiles and options for joist layout.

Create rafters battens purlins(Create rafters battens purlins) Animation Tutorial
Automatically creates roof rafters, purlins / slats, and cornices from selected faces.

Create hip roof(Create hip roof) Animation Tutorial
Generation of pitched roof geometry from faces of any shape.
Developer: Goh Chun Hee  
Version1.0.2New command
1001bits官方免费版本,由“SketchUp吧”purplewind 中文化。
应用实例
Comment
magical223   Comments time: 2021-8-9 21:07  
5

好好

A_贾东川   Comments time: 2021-7-27 12:33  
5

1

abcd0476   Comments time: 2021-5-31 11:16  
5

不错不错好好

overlook2008   Comments time: 2015-1-12 11:51  
3

有些实用的功能没有了,伤心

魅惑风魔   Comments time: 2014-8-31 14:04  
4

好东西

Note: You can comment if you are using the plugin.


Click stars Rating:
Your comment content:
My Plugin Library
More from this Uploader:
吧卦
5
(6)
吧卦
5
(1)
Who Browsed Also Browsed:
ly871108
5
(4)
4
(1)
吧卦
5
(2)
4
(4)
Who Installed Also Installed:
ly871108
4.7
(3)
ly871108
4.5
(22)

扫码关注
建模无敌

SUAPP插件库| 简体中文|繁體中文|English Version|

Copyright © 2008 - 2020 SUAPP插件库 All rights reserved. ( 蜀ICP备12030683号 )

GMT+8, 2021-11-29 01:55 , Processed in 0.048660 second(s), 7 queries , Gzip On, MemCache On.