Easily add a straight parking line to your model, and you can set the width, depth and angle of the parking space.Usage: click a starting point and drag to preview the parking space, press the "" key under the English input method to change the drawing direction of the parking space, then click the end point or enter the total length in the value box to end the drawing

Align the selected edge line to any model element near an axis. This tool is similar to the placement boundary (suapp No. 165), which is more practical when making special-shaped alignment.

Mark the solar exposure data, including solar altitude angle, summer solstice, winter solstice, spring equinox, latitude, longitude, altitude and azimuth. You can also see the incidence angle, percentage of exposure, horizontal shadow angle and vertical shadow angle.The "incident light" generated during annotation is presented as an auxiliary dotted line, and auxiliary points and

Save the selected group or component in the model as SKP model file separately. Before saving, it is necessary to ensure that the model has been named and saved. When saving a group or component separately, a folder with the name of the model will be created by default. Of course, the name of the saved folder can be customized.This job has four commands that can be adjusted

Generally, we get plane contours from CAD. This tool can lift a group of plane contours in Su into three-dimensional contours step by step. It can quickly convert the contour of the plane into a terrain model in combination with the generated terrain (suapp No. 429).Plug in usage:1. Place a group at altitude z = 0

Through parameter setting, a quasi spherical dome based on triangles is created at the origin, which is suitable for rapid modeling of dome buildings and structures. Note that if the parameter setting is too large, the generation time will be a little longer.This tool can select from the parameters to generate a report, which displays the detailed data of line segments and faces in great detail

Cut a group object by elevation. This function can quickly divide the area with specific height. For example, it can be divided into snow covered area above a certain elevation of the terrain, or it needs to be cut layer by layer when drawing simple buildings.be careful:The cutting line is in the group by default.After cutting, a wireframe group will be generated, such as

1001bit is a very intuitive and powerful set of professional plug-ins for architecture, including more than 40 practical tools for architecture, such as skin, stairs, doors and windows, wall, roof, column, terrain, etc. it supports a variety of architectural elements. In addition, it also has a variety of editing functions such as chamfer, follow, array and so on. Some tools also

Dig a hole in a plane with a custom shape. Select the shape face on the plane and run the plug-in to dig a hole.

This is a simple dynamic setting tool. By setting properties like sliding bar movement and hinge rotation for group or component objects, click the object to show the corresponding switch dynamics. It allows you to easily slide drawers in the cabinet model, rotate doors and windows in the house, and switch between the positions of any object you set